PBM Light Therapy for Neuropathy Relief with Acrylic Base

Product Specifications

Shell Material	Aluminum Alloy
Voltage	100-240V
Power Consumption	402W
Product Size	880 x 276 x 71mm (34.6 x 10.87 x 2.79in)
Net Weight	11.8kg
LEDs	300pcs
Lens Beam Angle	30 Degree
Wavelengths	630nm + 660nm + 810nm + 830nm + 850nm
Irradiance	160mW/cm² at 6 inches; 151mW/cm² at 12 inches; 130mW/cm² at 18 inches; 113mW/cm² at 24 inches.
EMF	0 μT @ 3 inches
Timer	0 – 30 Minutes
Dimmer	0 – 100%, with separate controls for Red & NIR.
Pulse Frequency	0 – 10,000Hz, with separate controls for Red & NIR.
Photon Mode	Red, NIR, Red + NIR
Life Span	100,000 Hours
Warranty	3 Years
Customizable (>/=1 unit)	Wavelengths, Pulse frequency, Logo, etc.

Frame Design (Patent)

Aluminum alloy material: A well-knit and ultrathin frame in an integrative molding method with a smooth cambered corner design looks more exquisite; Excellent thermal dissipation and outstanding oxidation resistance.

Cover patented acrylic panel: Heat-resistant and dust- and splash-proof characteristics help protect each lens.

No side holes: Prevent much dust entering into; Long and big customized logo are available on the side.

No sharp corners or bumpy screws: Safely use and move.

Cooling System Design (Patent)

Patented hydrodynamic heat dissipation technology ensures that the device stays at a moderate temperature during operation. Together with two mute built-in cooling fans and the design of cellular heat emission holes, air circulation and heat dissipation are effectively promoted.

The infrared red light therapy lamp can be used continuously for a longer period of time. Don’t worry about overheating, which will shorten its life or affect its performance.

High Irradiance

 

Easy-to-use by Intelligent Touch Screen

---

Red Light Therapy Effects

The lamp emulates the wavelength of natural sunlight to provide red light and invisible infrared light sources for photobiomodulation (PBM).

Red light sources have been demonstrated to be effective and safe for skin rejuvenation and intradermal collagen production. Red light is effectively absorbed by your skin, then increases blood circulation, stimulates collagen and elastin production. Collagen is an essential protein that is used to repair damaged tissues. It helps heal wounds, remove acne scars, shrink pores, tighten loose skin, lighten freckles and redness, etc.

Infrared light sources of IR-A (760–1400nm) will penetrate into skin, they go through the epidermis, dermis, and subcutaneous tissue to reach 5-10mm deep, then generate radiant heat from inside out, giving you rapid built-in heat therapy, improving tissue metabolism, dampening inflammation, reducing pain associated with joints and muscles, alleviating neuropathy, encouraging nerve regeneration and repair.

Non-pharmacological and Non-invasive Therapy for Neuropathy

Neuropathy patients experience pain in their daily activities, it can affect a specific nerve or multiple nerves throughout the body, affecting your senses, motor skills, or body functions. People usually treat it with medications or injection, non-pharmacological and non-invasive home remedies like infrared red light therapy can also help reduce the symptoms and regain control of your body, which is more easier and no side effect.

Red and near-infrared light penetrate through the skin, stimulating cellular energy. In return, the body increases circulation, reduces inflammation, provides pain relief and immune system modulation to the areas applied.

A study (J Orthop Sci. 2010 Mar;15(2):233-9. doi: 10.1007/s00776-009-1438-4. Epub 2010 Apr 1.) investigates the effect of LEDs on nerve regeneration and get the conclusion:
Nerve regeneration chamber fluid is produced from nerve stumps after nerve injury. This fluid contains neurotrophic factors that may accelerate axonal growth. Red to near-infrared LEDs have been shown to promote mitochondrial oxidative metabolism. In this study, LED irradiation improved nerve regeneration and increased antioxidation levels in the chamber fluid.

Five-Waveband ( 3 more wavelengths for next level therapy)

660nm and 850nm are commonly used for many years and won many posititve feedback, we designed extra beneficial wavelengths of 630nm, 810nm and 830nm and equally distributed to help enhance the effects. The proper portion was recognized by many therapists and doctors.

 

Patented Acrylic Base for Floor Stand

Packing List

1 x Light Therapy Device
1 x Remote Controller
1 x Power Cord (Follow your country standard)
1 x Acrylic Base
1 x Protective Goggles

Use Suggestion

Session：20-30 minutes for the same area in a session. It is better to start with a shorter session if you never use light therapy.

Frequency: 1-2 times a day for the same area treatment. Keep minimum 6 hours interval for the 2nd treatment for the same area.

Distance: Expose your skin and keep a distance at 6-24 inches from the device for best results.

Protect your eyes: Please wear goggles when enjoying the light therapy.

Tips: Drink some water before and during use.

NOT USE UNDER THESE CONDITIONS

Children under the age of 13, pregnancy and epilepsy, photo-allergy, and photosensitizing medications like lithium, melatonin, phenothiazine antipsychotics, and certain antibiotics.

People with a history of skin cancer, insensitive to heat, and systemic lupus erythematosus should also avoid this kind of treatment.

Besides, if you are currently taking steroids or cortisone injections, you should not receive light therapy.

Precautions

1. One treatment session for the same area should not exceed 30 minutes.
2. Turn off all power after finishing treatment, pull plugs off when not in use.
3. Do not use the device in the circumstances of hot, humid, dusty or have lampblack in the environment.
4. Keep your device away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on.
5. Keep your device in a cool, dry, well-ventilated location without corrosive gas.
6. Prevent impact or violent vibration, move it gently.
7. Avoiding alcohol or corrosive solvent to clean all parts of the device.

Maintenance

Turn off the power of your device first, and then unplug the power cord. Then use a light damp, soft, lint-free cloth to clean exterior. Do not spray liquid directly.

3-Year Warranty

All panels of Infrared Red Light (IRL) purchased new from IRL directly or an authorized reseller are warranted for a period of three years from the date of shipment from the factory. IRL will be responsible for the faults of the products caused by the normal using during the warranty period, repair or replace the corresponding component found to be defective at no charge to the purchaser.

IRL shall not be liable for any faults or damage caused by misuse, accidental or intentional damage, force majeure, or the product has been modified.